 |
| DS15 "Bateleur" about to get wet for the first time. |
She sails beautifully and she is fast. Beating into a chop in light wind this am going at about 3,7 kts felt happy. Then was told wind spd 4 kts by passing boat quite amazing.
Very well behaved. No balance issues. Save a bit of lee helm with the kite up. Loads of compliments from older sailors. Hunter Gall get on the water you dont know what you are missing. This is one good boat. Ps only sailed in bulb config at this stage.
A few changes to make. But not many. Congrats Dudley on a fantastic hull. Its a beaut.
Jims friend Mark Dawson was with him for the first sail and passed these comments:-
Lucky enough to be the first to sail this boat with James Norman Foot. What a beaut! After a hairy moment of rocking the boat to moorings, which became a desperate paddle when we started drifting towards the rocks, we rigged the sails and immediately accelerated away. Bateleur likes to sit flat and notably accelerate in the lightest of wind puffs. A forced capsized showed how stable she is and how literally effortless to bring her back. Sailing the Didi 15, I just want to go again. Cant wait to see her in stronger breeze. In summary...I need one.
Jim will keep us up to date with his testing and fine-tuning over the next few weeks. I hope that we will also get to see some photos and videos in stronger winds as Jim and "Bateleur" grow to know each other.
The top photo of this post shows the hull shape very nicely. For those who have not followed my posts about the build, this is a plywood boat although it doesnt look like one. It is the smallest in our radius chine plywood Didi design range. The hull is the same family as the Didi Mini Mk3 and Didi 950, with topside chine above a radius chine underbody.
It can be built from plans only, plans and patterns or plans and a CNC kit. See more info about all of our designs on our website at http://dixdesign.com/
A few changes to make. But not many. Congrats Dudley on a fantastic hull. Its a beaut.
 | |
| Ready for sails and rarin to go. |
 |
| Rigging the sails. Clean deck layout and large cockpit. |
Lucky enough to be the first to sail this boat with James Norman Foot. What a beaut! After a hairy moment of rocking the boat to moorings, which became a desperate paddle when we started drifting towards the rocks, we rigged the sails and immediately accelerated away. Bateleur likes to sit flat and notably accelerate in the lightest of wind puffs. A forced capsized showed how stable she is and how literally effortless to bring her back. Sailing the Didi 15, I just want to go again. Cant wait to see her in stronger breeze. In summary...I need one.
 |
| "Bateleur" returning to ABYC with a very happy crew. |
The top photo of this post shows the hull shape very nicely. For those who have not followed my posts about the build, this is a plywood boat although it doesnt look like one. It is the smallest in our radius chine plywood Didi design range. The hull is the same family as the Didi Mini Mk3 and Didi 950, with topside chine above a radius chine underbody.
It can be built from plans only, plans and patterns or plans and a CNC kit. See more info about all of our designs on our website at http://dixdesign.com/
0 komentar:
Posting Komentar